Home    Unmanaged Industrial Ethernet Switch    8*10/100/1000Base-TX Unmanaged Industrial Ethernet Switch

8*10/100/1000Base-TX Unmanaged Industrial Ethernet Switch

Feature:

1). 8*10/100/1000Base-TX RJ45 port.

2). 12-58VDC input, redundant power supply with polarity reverse/over-voltage protection.

3). Dip switch function: 1). Port isolation, 2). Flow control, 3). QoS, 4). Broadcast storm restrain.

4). Support 10K bytes jumbo frame.

5). Support 4kV surge protection, 15kV ESD(air) protection, 8kV contact protection.

6). IP40 fan-less aluminum alloy housing and DIN-Rail hardware design with compact size(48*98*98mm).

7). Operating temperature: -40℃ to 75℃.

 

Overview:

The FlyingFiber FF-IES0008G is the unmanaged industrial grade Ethernet switch with 8-port 10/100/1000Base-TX RJ45. It is featuring with port isolation, flow control, QoS and broadcast storm restrain function, which all can be configured by the Dip switch on the top panel.

FF-IES0008G is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with DIN-Rail installation, wide operating temperature from -40℃ to 75℃ as well as high-level EMI/EMC capability etc. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP surveillance and processing automation area where environmental conditions exceed commercial product specifications.

 

Technical Specification:

Interface

Fiber port

Ethernet (RJ45) port

0

8

8*10/100/1000Base-TX RJ45 port

Standard

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Efficient Ethernet

Dip Switch

1). Port isolation

2). Flow control

3). QoS

4). Broadcast storm restrain

LED Indicator

P(Power indicator) Green

Off: the device is power off or failed

On: the device power on is normal

S(System indicator) Red

Off: the chip is normal

On: the chip read/write is unnormal

1-8(RJ45 port)

Green indicator

Yellow indicator

Off: port link down

Off: port speed is 10/100M

On: port link up

On: port speed is 1000M

Blinking: data on TX/RX

Power Parameter

Input voltage

12-58VDC, redundant power input

Input current

0.6A Max

Total power consumption

Full loading ≤5W

Connector

Removable 4-pin terminal block

Reverse polarity protection

Support

Over-voltage protection

Support

Switching Feature

Switching capacity

16G

Packet forwarding rate

23.8 Mpps

MAC address table

16K

VLAN

4K

Buffer

2M

Forwarding delay

<10us

Jumbo frame

Support 10K bytes

MDX/MIDX

Support

Watchdog

Support

Network Topology

Star topology

Support

Bus topology

Support

Tree topology

Support

Mechanical Structure

IP grade

IP40

Installation method

DIN-Rail

Dimension(W*D*H)mm

48*98*98mm

Weight

0.6 kg

Operating Environment

Operating temperature: -40℃ to 75℃

Storage temperature: -40℃ to 85℃

Relative humidity: 5% to 95%(non-condensing)

Industrial Standard

Surge protection of power: IEC 61000-4-5 Level 3(4kV/2kV, 8/20us)

Surge protection of Ethernet port: IEC 61000-4-5 Level 3(4kV/2kV, 10/700us)

DIP: IEC 61000-4-11 Level 3(10V)

ESD: IEC 61000-4-2 Level 4(8kV/15kV)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE, FCC, RoHS

Warranty

5 years

 

Structure Diagram:

 

Order Information:

Model No.

Description

FF-IES0008G

Unmanaged industrial Ethernet switch, 8*10/100/1000Base-TX RJ45 port, DIN-Rail, 12-58VDC, -40 to 75°C operating temperature

Industrial_Ethernet_Switch
Industrial_Ethernet_Switch
Industrial_Ethernet_Switch
DIN-Rail_Industrial_Ethernet_Switch
Industrial_Ethernet_Switch